Video of this kit installed on a Land Cruiser 105 here

"Land Cruiser 100 Series Tuff Trek Mk3 Tent installation using Tough Touring Fitting Kit"

This Listing is for a Roof rail type Fitting kit - Outfolded through 100 degrees to allow mounting of a Tuff Trek Mk3 Roof top tent without any Platform or cross rails...

The Kit allows Access to all tent mounting bolts from beside the vehicle, facilitating easy removal of tent if desired once installed.

Height of the completed installation varies from vehicle to vehicle, but ithe Tent itself will typically sit between 15 and 30mm off the vehicles roof skin

The Roof rails themselves vary in weight due to size differences from vehicle to vehicle, but typically will be between 11 and 16 Kgs including rack feet and all mounting hardware.

The Kit allows for the lightest / Lowest and Strongest possible fitting of this Tent to 'Wagon; Type Roof Rail mount / supported vehicles listed here:

Roof Rail Type INFOLD and OUTFOLD Roof Racks Specifically Built for Roof top tents are now Available for: these 'Roof rail Type' vehicles:

Toyota 100 series
150 Prado
120 Prado
200 Series Land Cruisers
300 Series Land Cruiser
Land Rover Discovery 3 and 4
Y62 Nissan Patrol
MitsubishiPajero (roof rail type)
Isuzu Mux and varients
Universal Rail is also available for Unlisted Roof rail type vehicles as a 'blank' rail, it does require drilling.

Please note that these fitting kits are Shipped inside the tent, and are only available via Tuff Trek Australia at time of tent purchase. For existing Vehicle Roof rack removal, upgrade - Tough Touring Australia manufactures these components and can be contacted directly for supply...

These 'Tent to Vehicle' Kits are Manufactured Specifically to suit the Tuff Trek Mk 3 and are UNSUITABLE for installation of other types of tents,

Tent to Wagon (Roof Rail Type) Fitting Kit

$1,200.00

Quantity

The Roof Rails and Feet are Manufactured in Australia using 3mm Mild Steel, they are folded and then sandblasted and Powdercoated in Black Textura (Dulux).

Included in the Kit are:

2 x 1 Peice Roof rails

6 / 8 Oversized Rack feet

12 x 5mm Grip Nutserts (For insertion into the tent base)

Pack of PLA (Plastic) Rack feet insulation Spacers

2 x Tough Touring Logos

Assorted High Tensile Mounting Hardware
Installation of the Roof Rail fitting Kit is much the same as fitting of any roof rail kit to a vehicle. Experienced roof rack fitting help is available at any roof rack fitting business worldwide.

After Roof rails are fitted to the vehicles roof, the Tuff Trek Mk 3 tent is lowered onto the rails, carefully centred into the desired position and then marked at mounting points on the Tents Underside East west Cross Bars are make.

The Tent is then lifted off the roof, all marks are drilled out to 11.5mm and the included 5mm Grip Nutserts are inserted into the East west cross bars... After Nutserts are all inserted (Min of 3 each side) It is advisable to use the included anti vibration tape and add this to the roof rails.

The tent is then lowered back onto the roof rails, Nutserts are lined up with the Roof rails slotted mount holes and the lot bolted off.

Tent to Wagon (Roof Rail Type) Fitting Kit

PRODUCT INFO

RETURN & REFUND POLICY

SHIPPING INFO

FITTING INFORMATION -